Jaw crusher is applicable for the rough and (http://maplered.com) medium crushing of rocks and (http://maplered.com) ores that
have a compressive strength not more than 245MPa.
The equipment consists of bracket, jaw, eccentric shaft, jaw plate and (http://maplered.com) ancon plate.
Eccentric shaft is driven to rotate by motor and (http://maplered.com) jaw runs on adjusted track to
crush Material (http://g654.org) s in crushing chamber.
The bracket is welded by steel plate. On the front arm of bracket, jaw plate is fixed
by wedge-shaped bolt. Edge protection plate is equipped on inside wall of bracket
to prevent abrasion.
The moving jaw is a shaped casting with a kinetic jaw plate on the face. The upper
part of jaw is hung on upper and (http://maplered.com) lower parts of bracket and (http://maplered.com) supported on ancon
plate by eccentric shaft and (http://maplered.com) roller bearing. There are equipped flywheels and (http://maplered.com) grooved
pulleys at both ends of eccentric shaft.
Type | Input Size (mm) | Maximum Feed (mm) | Adjusted range (mm) | Treatment capacity (t/h) | Rotate speed of eccentric shaft (r/min) | Motor power (kw) | Weight (t) | Dimensions (L*W*H)(mm) |
| PE-150×250 | 150×250 | 125 | 10-40 | 1-3 | 250 | 5.5 | 0.6 | 720×660×850 |
| PE-200×300 | 200×300 | 180 | 15-50 | 2-6 | 260 | 7.5 | 1 | 910×750×990 |
| PE-200×350 | 200×350 | 180 | 18-70 | 3-10 | 260 | 11 | 1.3 | 1000×870×990 |
| PE-250×400 | 250×400 | 210 | 20-60 | 5-20 | 300 | 15 | 2.8 | 1300×1090×1270 |
| PE-400×600 | 400×600 | 340 | 40-100 | 16-60 | 275 | 30 | 7 | 1730×1730×1630 |
| PE-500×750 | 500×750 | 425 | 50-100 | 40-110 | 275 | 55 | 12 | 1980×2080×1870 |
| PE-600×900 | 600×900 | 500 | 65-160 | 50-180 | 250 | 55-75 | 17 | 2190×2206×2300 |
| PE-600×900 | 600×900 | 500 | 75-200 | 60-200 | 250 | 75 | 20 | 2290×2290×2400 |
| PE-750×1060 | 750×1060 | 630 | 80-140 | 115-330 | 250 | 110 | 29 | 2660×2430×2800 |
| PE-870×1060 | 870×1060 | 660 | 200-260 | 290-336 | 250 | 110 | 31.5 | 2810×2430×2800 |
| PE-900×1060 | 900×1060 | 685 | 230-290 | 160-400 | 250 | 110 | 33 | 2870×2420×2940 |
| PE-900×1200 | 900×1200 | 750 | 95-165 | 220-450 | 200 | 110 | 52 | 3380×2870×3330 |
| PE-1000×1200 | 1000×1200 | 850 | 195-265 | 315-500 | 200 | 110 | 55 | 3480×3876×3330 |
| PE-1200×1500 | 1200×1500 | 1020 | 150-300 | 400-800 | 180 | 160 | 100.9 | 4200×3300×3500 |
| PEX-150×750 | 150×750 | 120 | 18-48 | 8-25 | 320 | 15 | 3.8 | 1200×1530×1060 |
| 250×750 | 210 | 25-60 | 13-35 | 330 | 30 | 5.5 | 1380×1750×1540 | |
| PEX-250×1000 | 250×1000 | 210 | 25-60 | 16-52 | 330 | 37 | 7 | 1560×1950×1390 |
| PEX-250×1200 | 250×1200 | 210 | 25-60 | 20-61 | 330 | 45 | 8.5 | 2140×1660×1500 |
| PEX-300×1300 | 300×1300 | 250 | 20-90 | 16-105 | 300 | 75 | 11 | 2720×1950×1600 |
